Lighting & recessed lighting
Light every room the way you use it.
Wyatt Electric installs recessed lighting, fixtures, ceiling fans and outdoor security lighting in homes across Harford County, Baltimore County and Baltimore City. We plan the layout with you, pick dimmers that suit LED fixtures, and can add Lutron controls so the whole house runs from a keypad or your phone.
- ★5.0 · 12 Google reviews
- 4 Master Electricians on staff
- Licensed & insured
- Veteran owned
- 5.0 stars12 Google reviews
- Since 198640 years in business
- 4 MastersMaster Electricians
- Veteran ownedLicensed & insured
- ESGR 2010Above & Beyond Award
The short answer
Can you add recessed lighting to an existing ceiling?
Usually, yes. Modern LED recessed lights are slim enough to fit most ceilings without opening them up, and we fish the wiring through small holes. What matters is the layout, the right fixture for the ceiling, and a dimmer that's rated for LEDs so the lights don't flicker or hum.
- A layout that lights the room evenly, not a grid of random cans
- Fixtures rated for insulation contact where the ceiling is insulated
- Damp- or wet-rated fixtures in bathrooms and outdoors
- LED-compatible dimmers, so lights dim smoothly without buzzing
- Ceiling boxes rated for the weight of fans and heavy fixtures
- Lutron controls if you want scenes, schedules or phone control
What we install
Inside, outside and on the switch.
Here's what our lighting work covers, from one room to the whole house.
Recessed lighting
New recessed lights in finished ceilings or during a remodel, laid out for the room and wired to dimmers that suit them.
Fixtures and pendants
Chandeliers, pendants over an island, vanity lights and flush mounts, hung level and on a box rated to hold them.
Ceiling fans
Paddle fans on fan-rated boxes, with separate control of the fan and the light where the wiring allows.
Under-cabinet and accent lighting
Task lighting under kitchen cabinets and accent lighting on shelves, with the wiring hidden.
Outdoor and security lighting
Floodlights, motion-sensor lights and porch and garage lights, with wet-rated fixtures and weatherproof connections.
Dimmers and Lutron controls
LED-rated dimmers on single switches, or Lutron lighting control for scenes, schedules and keypads across the whole house.
How a lighting job works
Four steps to a better-lit room.
- 1
We walk the room with you.
We talk through how you use the space and where the light needs to go, and look at what's above the ceiling.
- 2
You get a layout and a price.
We mark fixture locations, agree the fixtures and controls, and give you the price before anything starts.
- 3
We install and wire it clean.
Fixtures go in through small, neat openings where possible, and the wiring is run to code. We clean up when we're done.
- 4
We test every light and dimmer.
Every fixture and dimmer is tested with you before we clean up and leave.
Lighting options
What goes where.
A quick guide to the main types of lighting and the details that make each one work.
Recessed
- Where it works best
- Kitchens, family rooms, basements and hallways: general light that stays out of sight.
- What to get right
- Spacing and placement, insulation-contact rating in insulated ceilings, and an LED-rated dimmer.
Pendants and fixtures
- Where it works best
- Over islands and tables, entries and stairwells: light that's also a design piece.
- What to get right
- Hanging height, a box rated for the weight, and a dimmer so it isn't too bright at night.
Under-cabinet
- Where it works best
- Kitchen counters and work areas where overhead light casts shadows.
- What to get right
- Hidden wiring and a switch where you'll reach for it.
Outdoor and security
- Where it works best
- Entries, driveways, garages, barns and the back yard.
- What to get right
- Wet-rated fixtures, weatherproof boxes and GFCI protection, plus motion sensors or timers.
| Lighting type | Where it works best | What to get right |
|---|---|---|
| Recessed | Kitchens, family rooms, basements and hallways: general light that stays out of sight. | Spacing and placement, insulation-contact rating in insulated ceilings, and an LED-rated dimmer. |
| Pendants and fixtures | Over islands and tables, entries and stairwells: light that's also a design piece. | Hanging height, a box rated for the weight, and a dimmer so it isn't too bright at night. |
| Under-cabinet | Kitchen counters and work areas where overhead light casts shadows. | Hidden wiring and a switch where you'll reach for it. |
| Outdoor and security | Entries, driveways, garages, barns and the back yard. | Wet-rated fixtures, weatherproof boxes and GFCI protection, plus motion sensors or timers. |
Flickering or humming LEDs are often a dimmer that wasn't made for LED loads. Swapping the dimmer usually fixes it.
Google reviews
What our customers say.
“The team at Wyatt Electric is a lifesaver. I had a 70 year old GE low voltage lighting system that needed to be upgraded and couldn't find an electrician willing to tackle it. I called all of the big electrician companies and no one could help me. I came across Wyatt's name and reached out. They had some familiarity with the system and were willing to come out to take a look. They took the time to understand the system and help me figure out a solution using wireless switches. They had a quote to me within a couple of days and I was able to schedule the work within a week or two for a reasonable price. They showed up on time, were very friendly and professional and had the system fully converted within a couple of days. It took a lot of work to figure out the wiring as nothing was labeled correctly in the relay panel, but they figured it out. They labeled everything and the installation was very neat and clean. They programmed everything for me so that it was all ready to go. I can't say enough good things about how they treat their customers. They are my new electricians. I had them back to install under cabinet lighting and had the same great experience.”
“We have called Wyatt Electric twice, once in 2020 and again just recently. Each time they came, they were very friendly and helpful. They fixed all of our problems and left our home clean, even after installing a ceiling fan in my daughter's bedroom. My daughter said that they are her BFFs after fixing the light in her playroom and installing a fan in her room. We would highly recommend them. Thank you for your hard work with a smile!”
“We absolutely love Wyatt Electric. Everyone we’ve worked with has been so friendly, professional, and dependable. They show up on time, explain everything clearly, and do top-quality work every single time. It’s such a relief to have electricians we fully trust and we won’t use anyone else!”
Lighting questions
Before you book.
Do you have to cut big holes to add recessed lights?
Usually not. Slim LED recessed fixtures fit through a small round opening, and we fish the wiring between them. Some ceilings, like ones with blocking or no attic access above, take more work, and we'll tell you up front.
Why do my LED lights flicker on the dimmer?
Most often the dimmer was made for older incandescent bulbs and isn't rated for LED loads, or the bulbs themselves aren't dimmable. A matching LED-rated dimmer usually solves it.
Can you install a ceiling fan where there's only a light?
Often, yes. The box has to be rated to hold a fan, so we check it and replace or brace it if needed. Separate fan and light control may need an extra wire, which we can usually add.
Can you add outdoor security lighting?
Yes. Security lighting is part of our residential work: floodlights, motion-sensor lights and lighting for garages, barns and driveways.
Do you install Lutron lighting controls?
Yes. Lutron lighting control systems are part of our residential work. They range from a few smart dimmers in one room to whole-house scenes and keypads.
How do I get a price?
Book a visit online or call 410-557-8557. We walk the room with you, then give you a layout and the price before anything starts.
Where we work · Lighting & recessed lighting
Three jurisdictions, one crew.
Each one has its own permit office and code edition. We work in all three and pull the permits ourselves.
- Harford CountyJarrettsville, Bel Air, Fallston, Forest Hill and the rest of the county.Electrician in Harford County
- Baltimore CountyTowson, Hunt Valley, Phoenix, Monkton, Sparks and the rest of the county.Electrician in Baltimore County
- Baltimore CityRowhomes and older houses across Baltimore City.Electrician in Baltimore City
Related services
Often paired with new lighting.
Book a visit
Need more light?
Let's plan it.
Book online in about a minute, or call or text 410-557-8557, Monday–Friday, 7am–6pm. We confirm by text, and a licensed electrician shows up in your window.